Overview

This course introduces the parallel sysplex's operations environment and teaches how the consoles should be set up in a sysplex, the commands and the command facilities for sysplex operations. It also explains the IPL process and how it changes in a sysplex, showing the correct way to IPL and remove systems in this environment, as well as covering the various errors that can occur at IPL time and how to deal with them.

For troubleshooting, attendees will learn how all the major points of failure can be detected, recognised and dealt with, including such areas as loss of systems, signalling paths, Coupling Facilities, structures, sysplex timers and Couple Data Sets.
This recently upgraded and redesigned course now includes extensive hands-on practical sessions, including real-life recovery scenarios!

Read more +

Prerequisites

Familiarity with z/OS commands and a good understanding of the principles and concepts of parallel sysplex, including XCF commands. This can be gained by attending RSM's course Parallel Sysplex Concepts & Facilities.

Read more +

Delegates will learn how to

  • efficiently operate a parallel sysplex environment
  • identify and deal with problems effectively
  • carry out problem determination in a parallel syplex environment
  • carry out recovery when required.
Read more +

Outline

Parallel Sysplex Overview

Introduction; What is a parallel sysplex?; XCF, the Cross-systems Coupling Facility; The SYSPLEX; Multisystem environments; It's not just signalling!; But what about data sharing?; The Coupling Facility; Coupling Facility data - Structures; Using the Coupling Facility; Data sharing services; OK, so WHY parallel sysplex?; A 'single image environment'; A sysplex is just a bigger multiprocessor!; Management of a single image environment; Dispatching work; Recovery and expendability; Continuous availability; The D XCF, D CF and SETXCF commands; DISPLAY XCF.

The Operations Environment

Our example system; Example system - logical view; Cloned images; Cloning support; IEASYMnn; System symbols, types and rules; IEASYSnn; LOADxx, IEASYMnn and IEASYSnn; Specifying the system name (&SYSNAME); An example of a cloned environment; Console configurations; System control & the console environment; MCS consoles in a sysplex; CONSOLnn definitions; CONSOLnn definitions: IPL BP01, IPL BP03, IPL BP08; Synchronous messages; Using the SYSCONS; Using EMCS consoles; New command facilities; Setting up and displaying system symbols; Command scope in the sysplex; Basic command routing in the sysplex; More about the ROUTE command; System groups; Using command and message prefixing; Displaying the command prefixes; CMDSYS and MSCOPE; Command flow in the sysplex; The System Logger; The System Logger environment; The System Logger policy; The OPERLOG logstream; Using SDSF with OPERLOG; The LOGREC logstream environment; Switching LOGREC; Running EREP; Displaying the System Logger.

Sysplex Operations

The sysplex environment; Clock synchronization techniques; Sysplex parameters and status; IPLing in the sysplex environment; IPLing to initialise the sysplex; IPLing subsequent systems; Initialising the sysplex - multiple IPLs; IXC405D - I, J or R?; Removing a system from the sysplex; Shutting down the sysplex; IPLing to re-initialise the sysplex; Managing the sysplex environment; CTC path naming conventions; Advantages of the naming convention; Path reconfiguration; What's in the Couple Data Sets?; Displaying Couple Data Set status; Using SETXCF COUPLE; IPLing after a Couple Data Set switch; Sysplex management components; Managing the Coupling Facility environment; Changing the CFRM policy; Moving a structure; Removing a Coupling Facility; Repopulating a Coupling Facility; Displaying Coupling Facility resources; Structure duplexing; Starting & stopping duplexing; SETXCF: START, STOP, MODIFY, COUPLE, FORCE.

IPL Problem Determination

What can go wrong?; Your options if a problem occurs; How to avoid most of these problems; Incorrect path definitions; Not enough path definitions; Unable to establish connectivity; Miscellaneous COUPLExx errors; Sysplex configuration parameters; PLEXCFG mode problems; Duplicate or inactive systems in the sysplex?; A reminder: IXC405D - I, J or R?; Slow systems or fast operators; Couple Data Set problems; Initializing the Coupling Facilities at IPL; Coupling Facility ownership problems; Coupling Facility reconciliation failure; Internal XCF component errors.

Runtime Problem Determination

It's the sysplex that counts, not the individual systems; Murphy's Law; Redundancy is good for you!; Our example configuration; Failure events and recovery options; CTC signalling path reconfiguration; Losing the last or only CTC signalling path; Structure signalling path 'reconfiguration'; Losing the only CFC to a signalling structure; Losing the only CF (using a structure for signalling); Losing the only signalling structure; 'Status update missing' conditions; Removing the system and replying 'down'; SPINTIME and INTERVAL; System Isolation techniques; SFM and ARM; The Sysplex Failure Manager (SFM); SFM policy options; SFM processing for connectivity failures; CF signalling, connectivity failures and SFM's weights; SFM processing for status update missing; SFM, system isolation; Time interval relationships with SFM; The SFM environment; Enabling SFM, switching SFM datasets; Other SFM considerations; Clocks, clocks and more clocks; ETR / TOD synchronisation; ETRDELTA; Sysplex Timer connectivity problems; Losing the sysplex timer; Couple Data Set problems; Failures in the Coupling Facility environment; Coupling Facility and CFC error indicators; Structure rebuild - an overview; Structure rebuild - why?; Structure rebuild controls; Structure rebuild - application support; Automatic Restart Manager; The ARM policy; The ARM defaults; Manipulating the ARM environment; ARM element states; D XCF ARMSTATUS; ARM restart, same system; ARM restart, cross-system; ARM considerations.

Read more +

Why choose QA

Dates & Locations

Need to know

Frequently asked questions

How can I create an account on myQA.com?

There are a number of ways to create an account. If you are a self-funder, simply select the "Create account" option on the login page.

If you have been booked onto a course by your company, you will receive a confirmation email. From this email, select "Sign into myQA" and you will be taken to the "Create account" page. Complete all of the details and select "Create account".

If you have the booking number you can also go here and select the "I have a booking number" option. Enter the booking reference and your surname. If the details match, you will be taken to the "Create account" page from where you can enter your details and confirm your account.

Find more answers to frequently asked questions in our FAQs: Bookings & Cancellations page.

How do QA’s virtual classroom courses work?

Our virtual classroom courses allow you to access award-winning classroom training, without leaving your home or office. Our learning professionals are specially trained on how to interact with remote attendees and our remote labs ensure all participants can take part in hands-on exercises wherever they are.

We use the WebEx video conferencing platform by Cisco. Before you book, check that you meet the WebEx system requirements and run a test meeting (more details in the link below) to ensure the software is compatible with your firewall settings. If it doesn’t work, try adjusting your settings or contact your IT department about permitting the website.

How do QA’s online courses work?

QA online courses, also commonly known as distance learning courses or elearning courses, take the form of interactive software designed for individual learning, but you will also have access to full support from our subject-matter experts for the duration of your course. When you book a QA online learning course you will receive immediate access to it through our e-learning platform and you can start to learn straight away, from any compatible device. Access to the online learning platform is valid for one year from the booking date.

All courses are built around case studies and presented in an engaging format, which includes storytelling elements, video, audio and humour. Every case study is supported by sample documents and a collection of Knowledge Nuggets that provide more in-depth detail on the wider processes.

When will I receive my joining instructions?

Joining instructions for QA courses are sent two weeks prior to the course start date, or immediately if the booking is confirmed within this timeframe. For course bookings made via QA but delivered by a third-party supplier, joining instructions are sent to attendees prior to the training course, but timescales vary depending on each supplier’s terms. Read more FAQs.

When will I receive my certificate?

Certificates of Achievement are issued at the end the course, either as a hard copy or via email. Read more here.

Let's talk

By submitting this form, you agree to QA processing your data in accordance with our Privacy Policy and Terms & Conditions. You can unsubscribe at any time by clicking the link in our emails or contacting us directly.